This is a tutorial level, like all Call of Duty games start. Pick up the rifle and proceed to the firing range. Shoot the targets as directed. CoD now features bullet velocity so you can shoot through certain types of materials to hit the enemy taking cover behind. Go back to the armory and pick up your pistol. Knife the watermelon and head outside. If you’re ever lost, hit escape and a mini-map should give you an overhead view of the surrounding area. You’ll pass a fuel tanker on the right, and then go through the hangar doors to join your team. You’ll receive new orders from Captain Price. Climb the ladder to an observation post. While he gives you new orders, take a look at the area below. You’ll proceed from checkpoint 1 to checkpoint 4. It can get a little confusing while clearing the area so I’ll try to give as best a description as I can. Climb down the rope and shoot the 3 targets through the windows. Proceed around the wall and enter the structure, hugging the wall to climb down the ladder. Shoot the target that appears and head left. Throw a flashbang into the next room and shoot the two targets within. Go left through the doorway and shoot the targets in front of you and to your right. Turn left, throw a flashbang into the next room and shoot both targets within. Without entering the room, exit the mock structure to the right sprinting, following the arrows on the floor to the finish line. I don’t think you get anything special for completing it at the best IW time, so its up to you if you want to try for it. When you’re done, approach the team by the monitors to receive your new briefing. You will now get to choose the difficulty you want to play the game at.
You are currently browsing the archive for the training category.
More and more people are turning to virtualization these days. One of the main reasons is in order to test pre-release, beta, or alpha software. When it comes to Linux, the operating systems are in a state of constant flux so there’s always something new to test. People routinely want to test beta versions of KDE and Gnome and other desktops before comitting, or simply want to see what features are in development.
We’d previously written an article about installing Ubuntu 6.10 Edgy Eft Knot 2 (it IS a long name) on a Mac Mini, so to do the same would be batty. Instead, this guide covers testing the newest Ubuntu 6.10 Edgy Eft Knot 3 on Windows XP using free (as in beer) virtualization. This guide would also apply to anyone testing on various flavours as well, as long as they can run our free virtualization software: VMWare Server 1.01.
Setting up the Ubuntu virtual machine in VMWare server is very easy (click the pictures for larger versions):
Connect to your local VMWare Server installation if you run it locally, or connect to your remote VMWare Server.
We’ll select “typical” for this virtual machine as VMWare Server includes a configuration for Ubuntu already.
And, speaking of which, here it is! Make sure to select the plain “Ubuntu” option, unless you are running a 64bit host, and downloaded the 64bit version of Edgy Eft knot 3.
Name your virtual machine and select the location. The defaults should be fine here but feel free to tinker.
I typically use bridged networking, but for added obfuscation you can use NAT (which creates a virtual network based on your host’s network connection). You could also select host-only if you only want to be able to contact the host operating system. In fact, if you really wanted to make sure the machine is isolated from the wiki wikid web, don it with a nice tinfoil hat and disable networking completely. Ubuntu won’t be happy, but it looks pretty nice in a tinfoil hat.
8 GB of diskspace is fine for testing.You’re not going to be leeching full seasons of Lost… at least we hope so.
Since we opted to allocate diskspace now, VMWare Server will start creating the 8GB file. This can take some time depending on your computer’s hardware. In my case this took a few minutes – I use SATA2 NCQ hard drives and have 2GB of RAM. Your mileage may vary.
You now have a default virtual machine set up, but it will need some slight tweaking in order to install Edgy Eft Knot 3 as fast as possible. Click on “edit virtual machine settings” and remove the floppy drive – we don’t need it. Set the memory to at least 512MB, but it really depends on your total amount. Since I have 2GB total RAM on my host I select 1GB normally. Edit the CDROM settings and point it at your Ubuntu Edgy Eft Knot 3 CD image. Click “OK” – we’re set for lift off.
Press start and drool over the new llivecd boot screen. Note the reflection on the logo. How original.
Now we’re at another original boot screen – the progress loader. Note the gradient progressbar, and the Crystal-esque Ubuntu logo. Reminds us of 3 years ago, doesn’t it precious? Yes, yes it does.
We’ve landed at the desktop. You may stop here if all you wanted was a secure browsing solution with no cookies and passwords to worry about. Should we wish to continue, our mission involves double-clicking that obvious “install” icon. Let’s go for it.
This is an easy 6 step process. Step 1 – select your language.
Step 2 – Select your location or timezone.
Step 3 – Select your keyboard layout. I normally recommend you test the layout just in case. We’ve typed in “blandname” here for demonstration purposes. You may wish to try typing “Ubuntu”, but nothing else lest ye be stricken down.
Step 4 – Identify yourself. This information will be used later in life to incriminate you. Be choosy with naming and passwords. Harry MacDonald that means you! Try typing in something other than your real name here – it works, I promise.
Step 5 – We’ve pre-allocated our diskpace, so no need to worry about this one. Just click the “forward” button.
Step 6 – There really isn’t a step 6. The Ubuntu team has decided to waste our time by confirming the already tedious and easy task. Onward, ho!
Installing – took me 30 minutes. It may take you an eternity, but with hardware prices where thet are, I seriously doubt it will take you long to be rolling with a virtual Edgy Eft install.
The eternity has passed, and we’re going to reboot. Don’t forget to disable or otherwise change the CDROM settings so you don’t end up installing again – that would be embarassing, right?
There you have it – the pretty login screen. Note those options. XDMCP looks very intriguing doesn’t it? We’ll get to that later…
And presto! What have we got here? Firefox 2.0b1 – Bon Echo Beta 1! Try it out and see what you think, I’m impressed so far to be honest.
So that’s it, you now have a working Ubuntu 6.10 Edgy Eft Knot 3 test virtual machine (edit: let’s make the name longer). And it weren’t hard neither! When Knot 4 comes out you’ll be able to do it in your sleep. If not, well we’ll see you searching for it again.
This quick guide will get you started backing up your CDs on you PowerPC Mac, or even your spanking new Intel MacBook Pro!
I recently downloaded and installed a wonderful application called Max from Sbooth software. Max is absolutely free, and not only that, but it’s also open source (OSS) and a universal binary.
Max reminds me quite a bit of EAC which is my favorite audio CD backup program when running Windows. In fact, one of the few things I had always longed to do on my G4 Mac Mini was backup some of my audio CDs for use with my iPod Mini.
Now I know that iTunes will rip CDs to MP3, but it doesn’t offer too much in terms in functionality. For exmaple, if you have a scratched CD, iTunes will often have problems with the file. iTunes also only converts one file at a time, making the process quite slow. Of course, Max can both copy from scratched audio CDs, as well as rip multiple tracks at once if you have multiple cores or processors such as the Mac Pro or the dual G4 and G5 workstations. With these computers iTunes is simply wasting your time and giving you bad quality files. Did I mention Max supports lossless formats? I could go on and on. Let’s get ripping!
First you’ll want to download the files from SourceForge (SourceForge is a great source of Open Source programs). Click on this link to download the latest Max release for OS X
Getting Started
Once you’ve downloaded the Max archive, installation is a snap (like most other Mac software). If you used Safari, FireFox or Opera, the file will have decompressed (expanded) to your desktop already. Even on Leopard it does the same thing. Double click on the Max folder and drag the Max application file (the one that looks like a blank CD with “Max” written on it with a red marker). We’re going to drag this file into the applications folder on your main hardware for easy access later. Once you’ve done this, you may also want to drag the file from there to your toolbar for later use.
OK, time to run Max for the first time. Are you liking the name “Max” yet? It reminds me of “Macs”.
Double-click on the icon for Max in your application folder, or single-click on the dock icon. Max will start up magically at your command and is now ready to backup your CDs in multitudinous formats. Huzzah.
To select which output formats will be generated:
1. Open the Formats section of the Preferences and double-click the desired format from the list of available formats
2. Edit the encoder settings, if desired
To create audio files from compact discs:
1. Insert the compact disc
2. Select the correct album information from that retrieved, if prompted to do so
3. If desired, download album art by selecting Download Album Art… from the Compact Disc menu
4. Click the Select All button
5. Click the Encode icon in the toolbar
6. The encoded files will be placed in your Music folder
To convert existing audio files to other formats:
1. Drag the files you would like to convert to the Converter window
⁃ Alternatively, select Convert Files… from the File menu
2. The converted files will be placed in your Music folder
First you will need to add the Terminal Services Role to your Longhorn installation either through the Roles Wizard or by using the Software Manager. You may also wish to install the Web TS Role while you are there to allow users to connect to a website, authenticate, and run a remote app easily. Once this has been completed, restart the system as required and head to the Administrative Tools Control Panel. Here you will find the Remote Programs applet. From here we can browse to an application to publish, and export it as an RDP file compatible with both Vista and current versions of Windows. You may also wish to add authentication to the file, but remember that if the file will be used on another system the authentication settings will be lost. In my case I used Word 2007 Beta – so I log in, and the window goes full screen with only Word loaded! This is a great way to securely publish apps with the right config, and I can’t wait to see what happens in the final version. This is very similar to what Citrix does, but presumably (keeping fingers crossed).
Recent Comments